AESSXF/ALS_Japanese Standard_Automotive wire & cable_Products

AESSXF/ALS

Product characteristics

Conductor: Annealed stranded copper

Insulation: XLPE

Shield: AI-Mylar Tape

Sheath: PVC

Standard Compliance: JASO D608; HMC ES SPEC

Operating temperature:–40 °C to +120 °C

Product inquiry

Features / uses

This XLPE insulated cable is used in low voltage signal circuits in automobiles. Superior heat resistant with irradiated PE. Suitable for the consideration of the flexibility and shielding characteristic. Shielding wire is consist of drain wire included AI-Mylar tape around core.

Technical parameter

	Conductor			Insulation	Cable
Nominal Cross- section	No.and Dia. of Wires	Diametermax.	Electrical Resistance at 20°C max.	ThicknessWall nom.	OverallDiameter min.	OverallDiameter max.	WeightApprox.
mm2	no./mm	mm	mΩ/m	mm	mm	mm	kg/km
1/0.3	19/0.16	0.8	49.4	0.3	3.4	3.6	17
2/0.3	19/0.16	0.8	49.4	0.3	3.9	4.1	24
3/0.3	19/0.16	0.8	49.4	0.3	4.1	4.3	29
4/0.3	19/0.16	0.8	49.4	0.3	4.4	4.7	35
1/0.5	19/0.19	1.0	35.03	0.3	3.6	3.8	20
2/0.5	19/0.19	1.0	35.03	0.3	4.3	4.5	28
3/0.5	19/0.19	1.0	35.03	0.3	4.7	4.9	38
4/0.5	19/0.19	1.0	35.03	0.3	5.1	5.3	46
1/0.75	19/0.23	1.2	23.88	0.3	3.8	4.0	23
2/0.75	19/0.23	1.2	23.88	0.3	4.9	5.1	38
3/0.75	19/0.23	1.2	23.88	0.3	5.1	5.3	49
4/0.75	19/0.23	1.2	23.88	0.3	5.6	5.8	60
1/1.25	37/0.21	1.5	15.2	0.3	4.1	4.3	28
2/1.25	37/0.21	1.5	15.2	0.3	5.5	5.7	48
3/1.25	37/0.21	1.5	15.2	0.3	5.8	6.0	64
4/1.25	37/0.21	1.5	15.2	0.3	6.3	6.5	80

Note: Other configurations, sizes, colors and length not specified herein are available upon request.

Product inquiry

Leave us a message and we will provide you with the best solution